Circulation pump
Grundfos UPSD 65-120 F 340
No. 96402284
Suitable for
heating
UPSD is a double-headed model of UPS three-speed pump and is used in heating and air conditioning systems. UPSD is installed at locations where active and standby operations are required for higher reliability.

The UPS 80-120/2 F 360 pump is of the sealed rotor type. That is, the pump and motor form a complete unit without a shaft seal and are only equipped with two gaskets for sealing. These bearings are suitable for lubrication by the pumped liquid. To avoid handling-related problems, it is necessary to use as few different materials as possible. The characteristics of this pump are as follows: 1.3-speed motor; 2.Ceramic radial bearing. 3.Carbon axial bearing. 4.Stainless steel rotor casing, bearing disk and rotor cladding. 5.Aluminum alloy rotor housing 6.Cast iron pump casing. 7.Stator equipped with a built-in thermal switch. This pump is equipped with a standard module in the junction box. The standard module is connected to the power supply through an external contactor.

Controller
Relay: without relay

Liquid
Transferred liquid: water
Liquid temperature range: -10.. 120 °C
Liquid temperature during operation: 60 °C
Density: 983.2 kg/m³

Technology
Rated flow rate: 40.6 m³/h
Rated head: 7.37 meters
Approvals: AAA,EAC

Installation
Ambient temperature range: 0.. 40 °C
Maximum operating pressure: 10 bar
Pipe connection standard: EN 1092-2

Interface model: DIN
Size of connection: DN 80
Pressure rating for pipe connection: PN 10
Port-to-port length: 360 millimeters

Electrical data

Input power at speed 1: 1000 watts
Input power at speed 2: 1100 watts
Maximum input power: 1500 watts
Power frequency: 50 Hz
Rated voltage: 3 x 400-415 V
Current at speed 1: 1.65 amperes
Current at speed 2: 1.8 amperes
Current at speed 3: 2.75 amperes
Cos phi at speed 1: 0.87
Cos phi at speed 2: 0.88
Cos phi: 0.79
Number of motor poles: 2
Insulation class (IEC 85): H
Enclosure class (IEC 60529): X4D
Built-in motor protection: CONTACT
Thermal protection: EXT.

Others
Terminal box position: 1.30H
Net weight: 36.5 kilograms
Gross weight: 38.4 kilograms
Shipping volume: 0.061 cubic meters
Custom tariff no.: 84137099.90

. Located in Tianjin, China, Tianjin Shiny-Metals Technologyco., Ltd. is a professional company that specializes in the research and development, design, production, sales, trade, and service of pumps. Our products are exported to more than 40 countries and regions, continuously building our global brand reputation. We offer a wide range of pumps, including centrifugal pumps, axial flow pumps, jet pumps, submersible pumps, deep-well submersible pumps, and swimming pool pumps, with over 500 specifications available. Our company has obtained the ISO 9001 certification from the International Organization for Standardization (CQC). In addition, our civilian motors have undergone product evaluation for CCC China mandatory certification. We have also received certifications such as CE, EMC, GS, RoHS, EAC, SASO, and ST. Our company is dedicated to meeting customer needs with high-quality products, reasonable prices, and exceptional pre-sales, in-sales, and after-sales services. We adhere to the management principles of "quality first, customer first, and reputation-based" and are committed to providing global customers with the best solutions for water pumps and water treatment systems, improving their quality of life. Our goal is to make the world a better place through water, and we strive to make water even better.